CUTTING MILLS

High-performance cutting mill, developed for high throughput rates

The LITech CM 3XX cutting mill is used for batch or continuous grinding of tough, fibrous, elastic and medium-hard materials. The cutting mill is preferably used in industry to shred soft, fibrous materials or to grind waste samples and secondary fuels. The material to be processed falls into the
through the hopper of the LITech CM 3XX and is millrf between the stationary and rotating knives until the granulate fits through the openings of the respective sieve and ends up in the collection container. The bottom sieve extends over the lower half of the half of the grinding chamber and can be easily replaced. The final fineness of the grain size is defined by the respective sieve size.

Advantages

• Bottom sieves and knives can be changed quickly
• Quick and easy to clean
• Better performance due to diagonal arrangement of the knives
• No need to readjust the cutting knives
• Optimum pelletising result with comparable pellet profile
• Opening the machine without tools
• Double external bearing, dust-protected rotor
• CE certified
• Tilting hopper with intervention protection and noise insulation
• Base frame with lockable swivel castors

Raw material savings

Thanks to its compact design, the LITech CM 3XX cutting mill can be easily integrated into any
existing production or processing line with one or more machines. The regrind can be removed using conventional extraction equipment. A frame is also available with which you can optionally discharge the material directly into a bulk container or a big bag.

Application examples

• Linoleum, carpet, fabrics
• Secondary fuels and biomass
• Food and animal feed
• Wood, paper, cardboard, cellulose
• Rubber, household waste, industrial waste, hospital waste
• Computer and electronic waste
• Plants, stems, twigs, branches, herbs, spices, grasses, straw Bones
• Technical plastics ABS, PA, POM, PE etc.

Advantages at a glance

• High-precision manufactured housing screwed and pinned
• Torsion-resistant rotors made from solid material
• High throughputs with low drive power
• Wear-resistant versions available for abrasive materials
• Developed for easy and complete cleaning by avoiding “dead corners” and inspection flaps
• Both rotor and stator knives can be reground multiple times
• Tilting hopper with intervention protection and noise insulation
• Knife package for difficult-to-cut materials
• Interchangeable bottom sieves 2/4/5/6/8/10/12
• Other screen sizes on request

Technical data

• Grinding chamber (jaw width) 250 x 250 / 380 / 500mm
• Rotor diameter 180mm
• Rotor knife 12 knives Stator knife 2 knives
• Motor power 4 – 7.5 KW
• Voltage 400V / 50Hz
• Screen perforation 4, 5, 6, 8, 10, 12 mm
• Weight from 360 kg